施工圍擋的制作過程及工程施工規定
來源:http://prabhusubramaniyan.com/ 發布時間:2022-11-03
施工圍擋的性應用難題的必要性當然無需多講,以便防止臨時性磚砌施工圍擋出現坍塌等隱患,導致多余的生產事故,各自對于采用不一樣的技術措施。下面濟南圍擋廠家來講講施工圍擋的制作過程及工程施工規定。
There is no need to talk about the necessity of the safety application problem of the construction enclosure, so as to prevent the temporary brick construction enclosure from collapsing and other potential safety hazards, resulting in redundant safety production accidents. Different technical measures are adopted for each. Next, Jinan enclosure manufacturer will talk about the manufacturing process and engineering construction regulations of the construction enclosure.
施工圍擋的制作過程:
Fabrication process of construction enclosure:
要將多種多樣原材料雙組分放進一起,并讓他們充足混和,隨后把握好時間和溫度,噴漆在鋼鋁型材上生產加工成才,接下去便是把提高材密封性在鋁型材中,另外把他們連在一起,變成施工圍擋。在施工圍擋的表層提高材額外耐腐蝕原材料,避免了銹蝕的很有可能。
The two components of various raw materials should be put together, and they should be fully mixed. Then the time and temperature should be well controlled, and the paint should be sprayed on the steel and aluminum profiles for production and processing. The next step is to improve the sealing of the materials in the aluminum profiles, and connect them together to become the construction fence. Additional corrosion-resistant raw materials are added on the surface of the construction enclosure to avoid the possibility of corrosion.
這樣一來,不但顯示信息出了施工圍擋空氣堅固、平穩干凈整潔、美觀大方的作用,還能保證了工程施工防護施工圍擋的系數和使用期。
In this way, the information not only shows that the construction enclosure has the function of firm, stable, clean, tidy, beautiful and generous air, but also ensures the safety factor and service life of the construction enclosure.
施工圍擋的工程施工規定:
Engineering construction regulations for construction enclosure:
1.工程圍擋為在施工圍擋安裝的情況下要提早搞好一系列的項目前期。例如將一些園林綠化的花草樹木栽種到別的地區,以致于安裝市政工程工程圍擋后牢固,不易被倒地和防止被風吹倒,進而出現生產事故。
1. The project enclosure is to do a series of early projects well in advance under the condition of construction enclosure installation. For example, some flowers, plants and trees for landscaping are planted in other areas, so that after the installation of municipal engineering enclosures, they are firm, not easy to fall to the ground and prevent them from being blown down by the wind, thus causing safety production accidents.
2.道路封閉端要設定“前方施工,車子繞道”的標志。管溝兩邊、深基坑邊和跨過管溝的人行通道等顯眼部位要設定“當心墜落”的性警示標識,
2. The closed end of the road shall be set with the sign of "construction ahead, vehicle bypass". The safety warning signs of "Beware of falling" shall be set at the two sides of the pipe trench, the side of the deep foundation pit and the pedestrian passage crossing the pipe trench,
3.安裝市政工程工程圍擋時務必以不危害非機動車性和行駛的前提條件下開展。當工程圍擋安裝結束后須將工程施工施工工地和外部完全防護,避免經過非機動車產生風險。
3. The installation of municipal engineering enclosure must be carried out on the premise of not endangering the safety and driving of non motor vehicles. After the installation of the project enclosure, the construction site and the exterior must be completely protected to avoid risks caused by non motor vehicles.
安裝好工程圍擋后請分配專職人員在的外界開展巡查保持因安裝施工圍擋造成路面麻煩紀律,注重一點在市政工程工程圍擋周邊嚴禁放置臟物等不有關的物品,原材料應放到特定地區,以防危害大城市容顏,乃是出現生產事故。更多相關事項就來我們網站http://prabhusubramaniyan.com咨詢吧!
After the installation of the project fence, please assign full-time personnel to carry out patrol outside to maintain the discipline of road trouble caused by the installation of the construction fence. Pay attention to the fact that it is strictly prohibited to place irrelevant items such as dirt around the municipal project fence. Raw materials should be placed in specific areas to prevent damage to the appearance of big cities and even production safety accidents. Come to our website for more information http://prabhusubramaniyan.com Consult!
- 上一篇:臨邊護欄應承受多少的外力撞擊
- 下一篇:基坑臨邊護欄的四點重要特性